Forced Induction Upgrades at Dales Motorsport

Forced Induction

A forced induction system overcomes the limitations of atmospheric pressure by pushing more air into the cylinders. Consequently, the engine’s power output becomes a function of how much boost it gets. What’s more, dialing up the boost pressure overcomes a lot of deficiencies in the induction system and cylinder heads that would otherwise limit air flow and the engine’s volumetric efficiency.

After all, it is much easier to push air into an engine with a turbo or blower than to suck it in with intake vacuum alone.

Even with a relatively moderate amount of boost, say 6 to 8 psi, a forced induction system can easily increase the power output of a typical street engine 150 or more horsepower.

Turn up the boost pressure to 14 to 16 psi and you can usually double the power output of most engines. Crank it up even more and you’re off to the races. The challenge then becomes building the engine so it can safely handle the extra power without breaking something.

Upgrades Below

Go direct to the Turbo upgrade page- Click HERE

 

If you know what parts you need you can follow the links above and they will direct you to our site.

If you need assistance finding the right part

 

call 604-530-9160 

or

email sales@dalesauto.ca

 

You can also fill out the inquiry sheet below, one of our service writers will contact you once they receive your info

INQUIRE

3 + 14 =

Go direct to the Turbo upgrade page- Click HERE

 

If you know what parts you need you can follow the links above and they will direct you to our site.

If you need assistance finding the right part

 

call 604-530-9160 

or

email sales@dalesauto.ca

 

You can also fill out the inquiry sheet below, one of our service writers will contact you once they receive your info

INQUIRE

11 + 1 =

Share This