AFE POWER SCORCHER MODULE: 2009-2013 BMW X5 XDRIVE35D

JUNE 5, 2016

aFe Power announces their new SCORCHER Module for the 2009-2013 BMW X5 xDrive35d with the L6-3.0L turbo diesel (M57) engine. A simple 5-minute install gives you huge performance gains. The aFe Power SCORCHER Module is designed to alter the pressure sensor signals to increase boost to an optimum level throughout the entire RPM range. The result is increased performance and improved throttle response across a broad power band as well as reduced turbo lag. In recent testing, this module added an extra +42 horsepower and +57 lbs. x ft. of torque verified by aFe’s in house dyno. The Scorcher Module is a direct plug and play unit that uses OE style “all weather” connectors with automotive grade TXL high heat and chemical resistant wire. Also fits 2009-2011 BMW 335d (E90) L6-3.0L turbo diesel (M57) engines.

Features

• Direct Plug In, 5 minute installation
• +42 HP / +57 lbs. x ft. torque max gains
• Improved throttle response across a broad power band
• Reduced turbo lag
• OE style “all weather” connectors with automotive grade TXL high heat and chemical resistant wire
• Output protection on all signals
• Blue L.E.D. power light w/ 3-Way Switch

Applications

• 2009-2013 BMW X5 xDrive35d / L6-3.0L (td) M57
• 2009-2011 BMW 335d (E90) L6-3.0L (td) M57

Part Number: 77-46308

Jobber: $495.00

 

FLOWMASTER AMERICAN THUNDER CAT-BACK: 2015-16 FORD F-150 WITH 2.7L/3.5L ECOBOOST, 3.5L TIVCT, OR 5.0L ENGINES

JUNE 3, 2016

Flowmaster’s American Thunder Cat-back exhaust system for the 2015-2016 Ford F150 is perfect for the person looking for an aggressive exterior sound level while maintaining a moderate interior sound with all of the performance benefits that you would expect from Flowmaster. This bolt on 409S stainless steel system for the 2.7L, 3.5L V6 and 5.0L V8 engines features 3.00-inch mandrel bent tubing that flows into a Super 40 muffler and then splits into dual 2.50-inch tailpipes. The system is finished off with dual 3.50-inch stainless steel tips that can exit out the rear or out the side. This system fits all cab and bed configurations except Standard Cab/Short Bed models. The exhaust system is manufactured in the USA and is covered by Flowmaster’s Lifetime Limited Warranty. Designed for an easy fit, this system includes all necessary parts and hardware for installation.

Features: 

  • Stainless Steel Construction
  • Includes Both Rear and Side Exit
  • Patented Delta Flow Technology
  • Mandrel Bent 409 stainless steel piping
  • Super 40 muffler
  • Dual 2.50-inch tailpipes

Technical Information:

  • Tip Finish: Polished
  • Tip Edge Style: Cut
  • Tip Diameter (in): 3.5
  • Outlet Diameter (in): 2.5
  • Tip: Cut Angle 
  • Sound Level: Moderate/Aggressive Sound
  • Tubing Diameter (in): 2.5
  • Muffler Type: Welded Baffle
  • Muffler Series: Super 40 Series
  • Tip Length (in): 13
  • Exit Position: Dual Rear Same Side Exit
  • Tip Style: Double wall
  • Tip Shape: Round
  • Tip Quantity: 2
  • Muffler Quantity: 1
  • Material: Stainless Steel
  • Inlet Diameter (in): 3
  • Color: b
  • Catalytic Converter Included: No
  • Tip Material: Stainless Steel
  • Tip Logo: Embossed

Notes: Does not fit standard cab/short bed trucks

Application: 2015-16 Ford F-150 With 2.7L/3.5L EcoBoost, 3.5L TiVCT, or 5.0L Engines

Part Number: 

817725, Flowmaster 15 Ford F-150 2.7/3.5L American Thunder Cat-Back Exhaust System – Dual Rear/Side Exit
MAP: $718.97

AFE POWER MACH FORCE-XP EXHAUST SYSTEM: 2015-2016 BMW M3/M4 (F80/82)

MAY 29, 2016

aFe Power has released the MACH Force-XP down-pipe back exhaust systems for the 2015-2016 BMW M3/M4 (F80/82) with L6 3.0-liter (tt) engine. This performance exhaust system is constructed from 100% hand TIG-welded, 2.5-inch mandrel bent, 304 stainless steel tubing for maximum flow. In testing, the down-pipe back exhaust system resulted in gains up to 15 horsepower and 27 lb-ft of torque, as measured on their in-house dyno. Included in this system are dual high-flow transverse mufflers to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. The mufflers come with a unique high-temp powder-coated black finish for an aggressive style. aFe also has incorporated an equalizer balance tube to evenly distribute exhaust pulses traveling through the exhaust system. This not only creates a more efficient flow and better performance but also reduces decibels minimizing exhaust drone. The system is then finished off with quad 3.5-inch diameter 304 stainless steel polished or carbon fiber tips with laser-etched aFe Power badging.

Features

• Constructed from 100-percent TIG-welded, 2.5-inch mandrel bent 304 stainless steel tubing
• Includes unique dual high flow, transverse mufflers with a high-temp powder-coated black finish
• Includes quad 3.5-inch diameter, carbon fiber/polished tips with CNC-machined, laser-etched inserts
• Incorporates an equalizer tube to balance and evenly distribute exhaust pulses traveling through the exhaust system reducing decibels and minimizing exhaust drone
• Uses all factory hanger locations for a hassle-free installation

Application: 2015-2016 BMW M3/M4 (F80/82)

Part Numbers

49-36323-1C : Carbon Fiber Tips

MAP: $2995.00

49-36323-1P : Polished Tips

MAP: $2495.00

 

 

AIR LIFT LOADLIFTER 5000: 2001-2010 CHEVROLET SILVERADO/GMC SIERRA

MAY 28, 2016

LoadLifter 5000 kits are Air Lift’s heaviest-rated air spring kits, specifically engineered for hauling or towing heavy loads. LoadLifter 5000 air springs are designed to fit popular vehicles like 3/4 ton and one-ton pickup trucks, motor homes, commercial trucks and other severe uses. LoadLifter 5000 air springs provide up to 5,000 pounds of leveling capacity* for support of your heaviest loads.
Tow and Haul with Safety & Comfort
Air Lift adjustable air springs work with your existing suspension to give your vehicle more leveling support when you need it, so your vehicle is always level and stable. Proper weight distribution to all tires means more safety and a more comfortable ride as well. This results in:
Improved braking and steering: when all four tires are firmly on the ground, braking time and steering are both improved.
Less sway: Air springs increase spring rate and vastly improve vehicle stability.
Less bottoming out: Air springs provide adjustable load support to help prevent bottoming out on rough roads.
Headlight aim: Only level and stable vehicles provide safe and proper headlight aiming.
Less porpoising: Even heavy pickups which don’t squat when loaded can begin to “porpoise” vertically when towing heavy trailers. Adjustable air springs dramatically reduce this problem for a safer, more comfortable ride.
More even tire wear: when weight is evenly distributed to all four tires, tires wear more evenly.
LoadLifter 5000 air springs fit easily between the frame and the axle to provide suspension support. To operate, just add air to the air springs if you are carrying a heavy load to make sure that your vehicle remains level and stable. Then, deflate when riding empty.
Air spring pressure is controlled through air line tubing that connects to the most convenient spot on your vehicle’s chassis. Air Lift air springs are fully adjustable from 5 to 100 PSI.
The kit includes 2 air springs, brackets, air lines, Schrader valve and all of the hardware you need for installation. LoadLifter 5000 air spring kits are engineered to be installed in under 2 hours and include a fully illustrated, user-friendly instruction manual.
Add an Air Lift On-Board Air Compressor System for increased convenience
LoadLifter 5000 air springs can also inflate and deflate easily on-the-go. For convenient air spring control at the touch of a button, add an Air Lift On-Board Air Compressor System. These systems are great for changes in load, weather or road conditions. Air Lift offers wireless models as well as models that mount in the cab. Air Lift compressor systems are the most advanced in the industry and work with all brands of air springs.
Best Warranty in the Business
All Air Lift adjustable air springs are backed by the best warranty in the industry and Air Lift is the only company that provides a Lifetime Warranty on air springs and hardware. Higher Standards, Higher Quality
LoadLifter 5000 kits are quality tested in Air Lift’s ISO 9001:2008 certified facility. ISO 9001:2008 standards ensure Air Lift products meet the highest level of safety and comfort.
Features
• Up to 5,000 lbs. of load-leveling capacity*
• Eliminates squat, trailer sway, rough ride and bottoming out
• Fits many 3/4 ton and 1 ton pickups and vans
Application: 2001-2010 Chevrolet Silverado/GMC Sierra
Part Number: 57275
MAP: $354.00
Contact Dales for best pricing 604-530-9160 or email sales@dalesmotorsport.com
Share This